Disables DHCP Router Discovery (All Windows)

The ICMP Router Discovery Protocol (IRDP) comes enabled by default for Windows clients using DHCP. This can be a security issue because by spoofing IRDP Router Advertisements, an attacker can remotely add default route entries on a remote system.

This tweak can be easily applied using WinGuides Tweak Manager. Download a free trial now!

Open your registry and find the key below for your operating system.

Windows 95, 98 and Me
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Class\NetTrans\####]

Where #### is the protocol binding for TCP/IP. More than one TCP/IP binding may exist.

Windows NT, 2000 and XP [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]

Create a new DWORD value called "PerformRouterDiscovery" and set the value to equal "0" to disable router discovery.

Restart Windows for the change to take effect.

Note: It is recommended that you disable this value as it is a possible security flaw in the DHCP service.

		(Default)	REG_SZ	(value not set)
		PerformRouterDiscovery	REG_DWORD	0x00000000 (0)

	HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\P...

>> Recommended Download - check, repair and optimize your registry now with Registry Mechanic <<

Disclaimer: Modifying the registry can cause serious problems that may require you to reinstall your operating system. We cannot guarantee that problems resulting from modifications to the registry can be solved. Use the information provided at your own risk.