SD5 (184) and Avast U3 a/v

[PJWilkin]

Just found that SD5 (version 184) and latest Database wont allow Avast AV (for U3 devices) run

http://www.avast.com/eng/avast-u3.html

Disabling On-Guard allows it to load and work

SD5 does not show any errors, just stops Avast working

Additional information:

If you try to install Avast with Onguard enabled, it fails. Disable Onguard and it works ok

[AChen]

Thanks for the info PJWilkin.

I will escalate this info and will get back to you on this.

[mjq424]

Hi
That is weird. I have no problems running/updating Avast! U3 with SD+AV build 184 running.

[PJWilkin]

Hi
That is weird. I have no problems running/updating Avast! U3 with SD+AV build 184 running.

I have two PC's both running SD5, both fail to run Avast from 2 different U3 devices. Only when OnGuard is disabled does it run OK

At first I thought my drive was corrupt, so I removed then re-installed it (from the link on my original post) ... that failed. Disabling Onguard allowed it to work OK

[c_edge]

I too have had no problems with this. Also running SD with the AV plugin.

Try switching off the OnGuard tools one at a time to see which tool is causing the problem.

c_edge :)