PCT can not pass PCflankLeaktest

[jzhhh]

test web:www.pcflank.com/PCFlankLeaktest.exe

I tested that can not pass the test, and i was worried. LNS can be passed this test. Can you repair the problem in short time? Thank you!

By the way, the default packet filter rules I personally think that security is not very high. Can you create more default rules in subsequent versions and it is also not difficult to us?

[AChen]

Hi jzhhh,

This is being reviewed by the developers.

Once I receive more info, will pass it on to you.

[hdavid]

Hello all.
Let me to clarify FW Leak Test on the "PCFlankLeaktest" program. FW passes PCFlankLeaktest. It seems this is a problem with PCFlankLeaktest itself. PCFlank represents incorrectly test results.
Even through local network connection is disabled, PCFlank shows "Your firewall has failed the test" message - please look at the attached file.
Steps of scenario below demonstrate that FW works correctly and passes this Leak Test:
1. Make sure FW is running and PCFlank isn't added to the Application List.
2. Launch PCFlank Leak Test program.
3. Start IE by PCFlank and enter the test data, which should be shown in "http://www.pcflank.com/pcflankleaktest_results.htm".
4. Press "Next" button.
As result FW pops up window about allow/block an attempt to access the internet - it means the entered test data isn't sent yet, but PCFlank reports that Leak Test is failed. Also we can see log information about this app - please look at second attached file.
5. Press "Open Browser..." button for look test results - IE cannot display this webpage.

[Simon Clausen]

FYI, the same things happens with the original Look'n'Stop so there seems to be something broken with the PC Flank test as the data is not getting through.

[jzhhh]

Hi,

I tested again, and I found that the situation was really like as you said. Although no pop-up when the program was connecting ,it did not send out information

thank you for your answer!