louiseun
05-04-2004, 08:44 AM
hi
I am having a complete nightmare with creating trusts... story so far....
situation - have one domain in one office which is NT4. have another office in london, with seperate domain running 2003 server. I have a VPN link between the two and can ping both sides.
Initially when i set this up... i had set trusts up on both sides and they were all verified. Then something has happened not sure what... now i can not browse the domain or anything.. have removed the trusts to re add them and they can now not be re-added as can not find domain controller.
the errors vary dependingo n what i try to do
setting the trust on NT side - it is unable to validate
setting up on 2003 - unable to contact domain controller.
can not browse to either domain
but doing start run \\2003 dc name... from NT side i get prompted for user name and password to connect sometimes.. and others an error about maximum connections received
from 2003 typing run \\NT dc name.. it can not find it - saying something along the lines of trust relationship failed.
i can ping boths sides using dc names.
have added the following to each sides lmhosts
10.10.10.10 DC name #PRE #DOM:Domain-Name
10.10.10.10 "domain \0x1b" #PRE
with making sure the spaces are correct and obviously changing the ip and names to the appropriate other side
I am starting to think that my problem on the 2003 side may be DNS... what exactly do i need to add to make sure the NT domain can be contacted....
any help with this headache would be great
thanks
I am having a complete nightmare with creating trusts... story so far....
situation - have one domain in one office which is NT4. have another office in london, with seperate domain running 2003 server. I have a VPN link between the two and can ping both sides.
Initially when i set this up... i had set trusts up on both sides and they were all verified. Then something has happened not sure what... now i can not browse the domain or anything.. have removed the trusts to re add them and they can now not be re-added as can not find domain controller.
the errors vary dependingo n what i try to do
setting the trust on NT side - it is unable to validate
setting up on 2003 - unable to contact domain controller.
can not browse to either domain
but doing start run \\2003 dc name... from NT side i get prompted for user name and password to connect sometimes.. and others an error about maximum connections received
from 2003 typing run \\NT dc name.. it can not find it - saying something along the lines of trust relationship failed.
i can ping boths sides using dc names.
have added the following to each sides lmhosts
10.10.10.10 DC name #PRE #DOM:Domain-Name
10.10.10.10 "domain \0x1b" #PRE
with making sure the spaces are correct and obviously changing the ip and names to the appropriate other side
I am starting to think that my problem on the 2003 side may be DNS... what exactly do i need to add to make sure the NT domain can be contacted....
any help with this headache would be great
thanks